POE-S416
16 Port IEEE802.3af/at 10/100Mbps 15.4W/30W POE Switch
2 Port Gigabit SFP slot Uplink and 2 Port Gigabit RJ45 Uplink
7.2Gbps Backplane Bandwidth, 250W Built-in Power Supply
POE-S416, 16 port channels unmanaged Power Over Ethernet Switch, It comes with 16 10/100Mbit RJ45 PoE ports, 2 Gigabit Copper/SFP Combo uplink Ports, and it complies to standard IEEE802.3af & IEEE802.3at.
Its wide switching capacity of 7.2Gbps greatly relieve the network congestion in office and improve the efficiency of power management and trouble shooting. 250Watts internal power supply dipatch each PoE port around 15.4W power.
Base on its special feature, PoE provides Ethernet data and power over Ethernet cable instead of network cable and electrical cable separately, which greatly reduce the comprehensive cost of its installation. Most importantly, the 16 Port PoE has buint-in Power Sourcing Equipment (PSE) that supplys intelligent power to terminal device which is known as Powered Device (PD) such as IP camera, VoIP Phone, Wireless Access Point (AP) and other IP based devices.
Main Features
1. 16 Port 10/100Mbps unmanaged PoE Switch, 2 Port Gigabit RJ45 Uplink and 2 Port Gigabit SFP Uplink
2. Complies with the IEEE 802.3AF/AT standard
3. If the POE Switch has less than 8 ports working only, it will comply with IEEE 802.3at and 25.4W a single port
4. Each PoE Switching port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet), 1000/2000Mbps (Gigabit Ethernet) is also supported
5. Support uplink port auto MDI/MDIX
6. Support flow control and adaptive device, prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
7. High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
8. Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
9. Double fan cooling system to guarantee the stability of the PoE Switch.
10. 7.2 Gbps Switching Capacity
11. Plug and Play, On/Off power switch
Detailed Specification
Item: 16 Port Power Over Ethernet Switch (30W POE)
Model: POE-S416
Ethernet Port: 16 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
Gigabit Port: 2 Gigabit SFP Uplink + 2 Gigabit RJ45 Uplink
PoE Standard: IEEE 802.3af/at Power over Ethernet(POE-PSE)
Power Requirement: 100-240V AC, 50-60 Hz, Built-in 250 watts
Forwarding Rate: 5.35Mbps; MAC: 4K,
PoE Power Input: 48VDC/5.2A, 250W
PoE Power Output: 48V DC, Maximum 30W single port
Power Pin Assignment: Pin 1,2 "+", 3,6 "-"
PoE Interface:
- 16-Port with PoE injector function
- Transfer Method: Store-and-Forward
- Switch Fabric: 7.2Gbps
- Flow Control: Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
- Dimension: 440mm×275mm×45mm; Weight: 5.0kg/piece
Protocol Standard:
- IEEE 802.3 Ethernet
- IEEE 802.3u Fast Ethernet
- IEEE 802.3ab Gigabit Ethernet
- IEEE 802.3z Gigabit Ethernet
- IEEE 802.3x Full-duplex Flow control
- IEEE 802.3af Power over Ethernet
- IEEE 802.1Q VLAN
- IEEE 802.1p QoS
Ambient Environment:
- Operating Temperature: 0~50 ℃ (32℉~122℉)
- Storage Temperature: -40~70 ℃ (-40℉~158℉)
Humidity:
- Operating Humidity: 5%~ 90%,
- Storage Humidity: 5%~ 90% (Non-condensing)
Safety Standards: CE, FCC, ROHS
Warranty: One year
|
|
POE-S416 16 Port IEEE802.3af/at 10/100Mbps 30W POE Switch (250W Internal Power) Images
|
